osoffice.co.uk

Hello All,

The beta is here:

[url]sorry - now removed[/url]

Preamble
Please take the time to give us your feedback, it does not take a few minutes to join the forum and make a post.
I have spent 100's of hours on this, and all I ask is a couple of minutes in return.


Enjoy your new Strongbolt server.

Jimbob

After installation, please visit this page again, and take a few seconds to click on the Poll at the top of this page.

Jimbob

I'd be willing to test a 550 version of this CD if ya have one ready.

Jeff

worked first time, no issues...sorted

jfleischer wrote:I'd be willing to test a 550 version of this CD if ya have one ready.

Jeff

I hope to have the 550 installer finished in the next week or so, Just keep checking this space.

Jimbob

just a note for those who had centos with raid1 set up and one of those disks was used for this install, you might need to wipe out the contents before getting a clean install.

well done on the restore cd james. will let you know how it goes.

How long should the setup take generally?

I tried the disk for the first time this morning, and it seemed to stall both times.

The first time it appeared to be stalled with something like 'setting up base directories' on the lcd.

The second time it seemed to stall with 'removing partitions' on the screen.

In both cases, I saw some network activity happening, but no disk activity. I can't say how long for sure they were stuck in that state, as I had walked away to do other things after starting the install. However, in both cases I left the supposed stalled message for at least another 10 minutes after I discovered it.

I might be able to give this another try on Saturday when I can actually stay by the machine and watch it does. Maybe I could also try it on one of my other raq4's

Hi,

Please can you give details of your raq. Please include

raq type (eg. raq 4r)

amount of memory, processor speed, number of drives, drive size, rom version.

Jimbob

This is a Raq4r

Memory: 512 MB
CPU 0: AuthenticAMD 448MHz (4.5 x 100MHz host bus) [BSP]
2 30GB drives
Firmware version 2.10.3-ext3

awesome installer! super easy, once you learn patience. I restarted twice because I thought it was hung on the portmap - should have read the forum first...

I had debian working prior to this with kernel 2.4.15. it worked, but I had to install alien in order to convert rpm's to dpkg's to install.

took about 35 minutes, start to finish.

raq3i / 300mhz
256mb ram
15gb hdd


well done. thanks.

mmabob, have you tried to put just one clean disk with no partition information? that is one area where i got stuck on. i do not believe there is provision for raid1 on this release.

Jimbob, the installer woked perfectly just as you described!

It took almost exactly 35 minutes.

I tried it again this morning on my raq4r. I have not changed anything about the raq since the last install attempt. I have not changed anything about the config of the rack since the first attempt even. Silly as it sounds, the only thing I did different was stand around and watch it. The only difference was that I was there to wiggle the mouse on the restore laptop every 5-8 minutes. I can't imagine that made a difference as the laptop never actually 'went to sleep' or 'hibernate' on the previous installs.

For whatever reason, it worked this time, and I thank you. I use centos4 at work on all the servers I work with, and I'm so glad you created a Raq installer. I'll be sure to load this on my other 2 raq4's.

Thanks again Jimbob!

Jimbob,

Took a few tries - kept hanging on "ready to install" until I disconnected the second drive.

Sucessfully installed on 2 RaQ4r's. (K6-500, 512MB, WD 80GB, 2.10.3-ext3)

Thanks again for the installer!

Any chance on RAID1 in the future? (I'd be glad to test)

Hey James

Thanks for this disk.

Install worked flawlessly!

RAQ 3
AMD 500Mhz
512MB Ram
40Gb Disk

Ian

Thanks' BUT do you add next drivers:
kudzu -p

...
class: NETWORK
bus: PCI
detached: 0
device: eth1
driver: natsemi
desc: "National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controlle
r"
vendorId: 100b
deviceId: 0020
subVendorId: 100b
subDeviceId: 0020
pciType: 1
pcidom: 0
pcibus: 0
pcidev: 12
pcifn: 0

I adding intel networ card. it's working now.

This system working Cobalt Cube 3 Bus Plus

If you want install messages, send email.

Thank's